2005 Bmw 325i problems

General information about Bmw-325i
Overview of popular issues
Recalls list

The BMW E30 is the second generation of BMW 3 Series, which was produced from 1982 to 1994 and replaced the E21 3 Series. The model range included 2-door coupe and convertible body styles, as well as being the first 3 Series to be produced in 4-door sedan and wagon/estate body styles. It was powered by four-cylinder petrol, six-cylinder petrol and six-cylinder diesel engines, the latter a first for the 3 Series. The E30 325iX model was the first BMW to have all-wheel drive.

The first BMW M3 model was built on the E30 platform and was powered by the high-revving BMW S14 four-cylinder petrol engine, which produced 175 kW (235 bhp) in its final iteration. The BMW Z1 roadster was also based on the E30 platform. Following the launch of the E36 3 Series in 1990, the E30 began to be phased out.

Development

Development of the E30 3 Series began in July 1976, with styling being developed under chief designer Claus Luthe with exterior styling led by Boyke Boyer. In 1978, the final design was approved, with design freeze (cubing process) being completed in 1979. BMW's launch film for the E30 shows the design process including Computer-aided design (CAD), crash testing and wind-tunnel testing. The car was released at the end of November 1982.

Externally, the E30's appearance is very similar to twin headlight versions of its E21 predecessor, however there are various detail changes in styling to the E30. Major differences to the E21 include the interior and a revised suspension, the latter to reduce the oversteer for which the E21 was criticised.

Social links

Common 2005 Bmw 325i problems

Based on the complaints from owners of the 2005 BMW 325i, several common problems have been identified:

Oil Leaks: Owners have reported oil leaks from the lower engine area, particularly from the oil filter housing and valve cover gasket. The oil filter housing seal can weaken over time, leading to oil leaks underneath the car. Similarly, the valve cover gasket may develop leaks, causing oil to drip onto the exhaust manifold. These leaks can result in oil burning smells and potential engine damage if not addressed promptly.
Coolant Leaks: Complaints include issues with coolant leaks, which can stem from various components such as the radiator, water pump, or hoses. Coolant leaks can lead to overheating problems, engine damage, and potential safety hazards if the coolant level drops significantly. Regular monitoring of the coolant system and addressing leaks promptly is crucial to prevent engine overheating.
CCV System: The CCV (Crankcase Ventilation) system in the 2005 BMW 325i has been a source of problems for some owners. Issues with the CCV system can result in poor engine performance, increased oil consumption, and potential damage to engine components. Regular maintenance and inspection of the CCV system are essential to ensure proper functioning and prevent costly repairs.
Front Lower Control Arm Bushings: Front lower control arm bushings are another common problem reported by owners. Worn or damaged control arm bushings can lead to steering instability, vibrations, and uneven tire wear. Replacing these bushings when necessary is crucial to maintain proper alignment, handling, and overall driving safety.
Window Regulators: Window regulator issues have been highlighted by owners, indicating problems with the mechanism that controls the movement of the windows. Malfunctioning window regulators can result in windows getting stuck, not closing properly, or making unusual noises. Prompt repair or replacement of faulty window regulators is essential to ensure the functionality of the windows and prevent potential safety concerns.

These common problems with the 2005 BMW 325i, as reported by owners, underscore the importance of regular maintenance, timely repairs, and thorough inspections to address issues promptly and maintain the performance and reliability of the vehicle.

How many miles can a 2005 BMW 325i last?

With regular maintenance, timely repairs, and adherence to the manufacturer's recommended service schedules, a BMW 325i can potentially last well over 100,000 miles and even reach 200,000 miles or more.

Is the BMW 325i reliable?

One of the many reasons to buy a BMW is that it is well-built. Most rear-wheel drive BMWs have the same weight on the front and back wheels. The world knows that BMWs are reliable, and the BMW 325I is no different. This model is strong, long-lasting, and reliable because it is well-made and well-engineered.

What is the recall on 2005 BMW 325ci?

BMW Recall: Airbag Inflator Concern

In the event of a crash necessitating deployment of the passenger's frontal air bag, excessive internal pressure could cause rupturing of the inflator resulting in metal fragments striking and potentially seriously injuring the passenger seat occupant or other occupants.

How many miles per gallon does a 2005 BMW 325i get?

22 combined

Find and Compare Cars

2005 BMW 325i
Personalize Find a car	6 cyl, 2.5 L, Automatic (S6) Compare
Fuel Economy
EPA MPG	Premium Gasoline 22 combined city/highway MPG 19 city 28 highway 4.5 gals/100 miles
Unofficial MPG Estimates Shared by Vehicle Owners	View Estimates How can I share my MPG?

Is the BMW 325i a reliable car?

How many miles can a 2005 BMW 325i last?

What is the mileage of BMW 325i?

BMW 3 Series 325I gives around 9 kmpl mileage.

Is a 2006 325i a good car?

The 325i is a pretty reliable German car. You should be good to about ~80K miles before you start having to replace bigger items. The core of the car (engine, drivetrain) will be solid for a long time.

2005 Bmw 325i complaints

The NHTSA has received 0 complaints about various vehicle components related to the 2005 Bmw 325i.

You can leave your car complaint via the special form below.

2005 Bmw 325i recalls

The National Highway Traffic Safety Administration (NHTSA) has issued 5 recalls for different components of the 2005 Bmw 325i.

2020-01-15

Manufacturer: BMW of North America, LLC
Components: AIR BAGS:FRONTAL:PASSENGER SIDE:INFLATOR MODULE
Summary: BMW of North America, LLC (BMW) is recalling certain 2000-2005 323iT, 325iT, 325xiT, 320i, 323i, 325i, 325xi, 328i, 330i and 330xi and 2000-2006 323Ci, 325Ci, 328Ci, 330Ci, M3 Coupe, 323Cic, 325Cic, 330Cic, and M3 Convertible vehicles equipped with non-desiccated frontal Takata PSAN inflators and PSPI passenger frontal air bag inflators containing phase stabilized ammonium nitrate (PSAN) propellant that were used as interim remedy parts for previous Takata recalls. These inflators may explode due to propellant degradation occurring after long-term exposure to high absolute humidity, high temperatures, and high temperature cycling.
Consequence: An inflator explosion may result in sharp metal fragments striking the driver or other occupants resulting in serious injury or death.
Remedy: BMW will notify owners, and dealers will replace the passenger's front air bag, free of charge. The recall began February 13, 2020. Owners may contact BMW customer service at 1-800-525-7417.

2015-05-28

Manufacturer: BMW of North America, LLC
Park It: 1
Components: AIR BAGS:FRONTAL:DRIVER SIDE:INFLATOR MODULE
Summary: BMW of North America, LLC (BMW) is recalling certain model year 2002-2005 325i, 325xi, 330i, and 330xi Sedans, and 325xi and 325i Sportswagons, 2002-2006 330Ci, 325Ci, and M3 Convertibles and 325i, 330i, and M3 Coupes, 2002-2003 M5, 540i, 525i Sedan, and 530i Sedans, and 540i and 525i Sportswagons, and 2003 X5 3.0i and 4.4i Sports Activity Vehicles. Please note that the 5-series and X5 vehicles are only included if they are equipped with the optional sports steering wheel. The affected vehicles are equipped with a dual-stage driver frontal air bag that may be susceptible to moisture intrusion which, over time, could cause the inflator to rupture.
Consequence: In the event of a crash necessitating deployment of the driver's frontal air bag, the inflator could rupture with metal fragments striking the driver or other occupants resulting in serious injury or death.
Remedy: Owners are advised not to drive their vehicles until the vehicle has been remedied. BMW will notify owners, and dealers will replace the front driver air bag module, free of charge. The recall began Aug 2016. Owners may contact BMW customer service at 1-800-525-7417. Note: This recall supersedes recall 14V-348 in its entirety. Additionally, vehicles that have had their driver side frontal air bag replaced previously as part of a recall remedy need to have their air bag replaced under this recall as well. Note: On December 17, 2015 BMW removed the model year 2004 X5 3.0i and 4.4i Sports Activity vehicle from this recall. Those vehicles were mistakenly identified as including the air bags that are subject to this recall.

2014-07-16

Manufacturer: BMW of North America, LLC
Components: AIR BAGS
Summary: BMW of North America, LLC (BMW) is recalling certain model year 2000 323i sedans, coupes, convertibles, and Sports Wagons; 2000 328i sedans and coupes; 2001-2005 325i sedans, coupes, convertibles, and Sport Wagons; 2001-2005 325xi sedans and Sports Wagons; 2006 325i coupes and convertibles; 2001-2006 330i sedans, coupes, and convertibles; 2001-2005 330xi sedans; and 2001-2006 M3 coupes and convertibles to address a safety defect in the passenger side frontal air bag which may produce excessive internal pressure that could cause the air bag inflator to rupture upon deployment of the air bag.
Consequence: In the event of a crash necessitating deployment of the passenger's frontal air bag, excessive internal pressure could cause rupturing of the inflator resulting in metal fragments striking and potentially seriously injuring the passenger seat occupant or other occupants.
Remedy: BMW will notify owners, and dealers will replace the passenger side frontal air bag, free of charge. An interim notice was mailed to owners in September 2014. A second notice was mailed when an adequate supply of parts became available, on December 1, 2014. Owners may contact BMW customer service at 1-800-525-7417 or email BMW at [email protected].

2011-08-26

Manufacturer: BMW OF NORTH AMERICA, LLC
Components: EXTERIOR LIGHTING:TAIL LIGHTS
Summary: BMW IS RECALLING CERTAIN MODEL YEAR 2002-2005 325I, 325XI, 330I, AND 330XI VEHICLES MANUFACTURED FROM SEPTEMBER 1, 2001, THROUGH MARCH 1, 2005. OVER TIME, RESISTANCE IN THE ELECTRICAL CONTACTS MAY CAUSE ONE OR MORE REAR LAMP FUNCTIONS (TAIL LIGHT, BRAKE LIGHT, AND/OR TURN-SIGNAL), WITHIN THE VEHICLE'S BODY PANEL, TO STOP WORKING.
Consequence: INTERMITTENT LIGHT OPERATION REDUCES THE ABILITY TO WARN OTHER MOTORISTS OF THE DRIVER'S INTENTIONS. THIS COULD CAUSE A VEHICLE CRASH WITHOUT WARNING.
Remedy: BMW WILL NOTIFY OWNERS, AND DEALERS WILL REPAIR THE VEHICLES FREE OF CHARGE. THE SAFETY RECALL BEGAN ON FEBRUARY 15, 2012. OWNERS MAY CONTACT BMW CUSTOMER RELATIONS AND SERVICES AT 1-800-525-7417.

2007-03-29

Manufacturer: CARDONE INDUSTRIES, INC.
Components: SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:MASTER CYLINDER
Summary: CERTAIN CARDONE MASTER CYLINDERS WITH PART NUMBERS 10-2925, 10-2987, 10-2987MZA, 10-3083, 11-3015, 11-3042, 11-3044, 11-3045, 11-3047, 11-3064, AND 11-3156, AND WITH DATE CODES LOWER THAN DCA7078 SOLD AS REPLACEMENT EQUIPMENT FOR USE ON THE VEHICLES LISTED ABOVE. THE SEAL ON MASTER CYLINDER CAN FAIL AND LEAK BRAKE FLUID.
Consequence: LOSS OF BRAKE FLUID CAN RESULT IN POOR BRAKING PERFORMANCE, POSSIBLY RESULTING IN A VEHICLE CRASH.
Remedy: CARDONE WILL NOTIFY OWNERS AND OFFER TO REPURCHASE ANY DEFECTIVE MASTER CYLINDERS. THE RECALL BEGAN DURING APRIL 2007. OWNERS CAN CONTACT CARDONE AT 1-800-777-4780.