2011 Ford E-250 problems

General information about Ford-E-250
Overview of popular issues
Analysis of common problems
Сomplaints list
Recalls list

The Ford E-Series (also known as the Ford Econoline, Ford Econovan or Ford Club Wagon) is a range of full-size vans manufactured and marketed by the Ford Motor Company. Introduced for 1961 as the replacement of the Ford F-Series panel van, four generations of the model line have been produced. Marketed for both cargo and passenger transport configurations, the E-Series has been designed with multiple design variations for both retail and commercial sale, including vans, and commercial-grade cutaway van chassis and stripped chassis (a chassis without bodywork).

With over 8.2 million units sold since 1961, the Ford E-Series is the third-best selling van line in history (outranked only by the Ford Transit and Volkswagen Transporter). Ford retired the E-Series passenger and cargo vans after 2014, replacing them with the Ford Transit. As of current production, the E-Series remains offered exclusively in cutaway and stripped-chassis configurations. In 2021, the model line entered its 60th year of production (becoming the second current Ford line to do so).

The E-Series (cutaway/stripped chassis) is assembled by Ford at its Ohio Assembly facility (Avon Lake, Ohio), which has produced the model line since 1975. Prior to its closure, Lorain Assembly (Lorain, Ohio) assembled the model line from 1961 to 2005.

Social links

Common 2011 Ford E-250 problems

The 2011 Ford E-250 is a popular choice for commercial and personal use, but like any vehicle, it has its share of common problems. Here are some of the most frequently reported issues by owners of the 2011 Ford E-250, based on available data:

Exhaust Leak: The exhaust manifold in the 2011 Ford E-250 can crack or rot, leading to exhaust leaks. This can cause a ticking noise when the engine is cold and a smell of exhaust coming from the engine compartment. The studs that hold the manifold in place may also break, leading to loose contact and exhaust fumes leaking into the engine compartment. To fix this issue, the manifold should be inspected for cracks or traumas, and the studs should be replaced if broken.

Blower Motor: The blower motor on the 2011 Ford E-250 can fail or not work at certain speeds, often caused by a bad resistor. This can result in the blower motor not working at all or only working at certain speeds. A bad blower motor can be caused by loose wires that come into contact with the exhaust gas recirculation tube and get burnt due to extreme temperatures. To fix this issue, the wiring, resistor, and blower motor should be checked and replaced if necessary.

Engine Misfire: The 2011 Ford E-250 can experience engine misfires due to worn-out or cracked spark plugs or bad coil packs. This can cause the check engine light to come on and the engine to skip or buck. To diagnose and fix this issue, the cylinder that is misfiring should be identified, and the spark plug or coil pack should be replaced if necessary.

Transmission Leaks: The 2011 Ford E-250 can experience transmission leaks, often caused by worn-out seals or gaskets. This can lead to a loss of transmission fluid and a decrease in performance. To fix this issue, the transmission should be inspected for leaks, and the seals or gaskets should be replaced if necessary.

Steering and Suspension Issues: The 2011 Ford E-250 can experience steering and suspension issues, often caused by worn-out components or lack of maintenance. This can lead to a rough ride, pulling to one side, or difficulty steering. To fix this issue, the steering and suspension components should be inspected and replaced if necessary.

Regular maintenance, such as fluid exchanges, filter changes, new brake pads, oil changes, and tire rotations, can help prevent these issues and keep the 2011 Ford E-250 running smoothly. It is recommended to follow the recommended maintenance schedule provided by the manufacturer to ensure the longevity and reliability of the vehicle.

What engine is in a Ford e250?

4.6-liter Triton V8

The Ford E-250 cargo vans are built on a rugged platform and offer large interiors with vast cargo capacities. The Ford E-250 comes with a standard 225-hp 4.6-liter Triton V8 with an optional 255-hp 5.4-liter Triton V8. Both engines are mated to a four-speed automatic transmission.

How much can a Ford E-250 carry?

The E-250 has a payload capacity of 3,470 pounds.

When did Ford stop making the E-250?

Ford retired the E-Series passenger and cargo vans after 2014, replacing them with the Ford Transit. As of current production, the E-Series remains offered exclusively in cutaway and stripped-chassis configurations.

When did Ford stop making Econoline vans?

2015

Background of the Ford Econoline

The E-series vans were the top-selling models in the United States between 1980 and 2015 with the model line's discontinuation.

When did Ford stop making the e250?

Why is my Ford E-250 not starting?

The most common reasons a Ford E-250 won't start are a dead battery, an alternator problem, or failed starter.

What engine is in a Ford E-250?

4.6-liter Triton V8

How much can a Ford E-250 carry?

Payload Capacity:

The E-150 has a payload capacity of 3,220 pounds. The E-250 has a payload capacity of 3,470 pounds.

2011 Ford E-250 car problems categorized by type of issue

After analyzing all complaints sent to the NHTSA and researching popular Ford E-250 problems, we found that the most common problems with these 2023 model year vehicles are:

Engine problems
Power train problems
Fuel/propulsion system problems
Wheels problems
Exterior lighting problems

The graph below shows statistics for all 2011 Ford E-250 vehicle components and the number of complaints received.

2011 Ford E-250 complaints

The NHTSA has received 6 complaints about various vehicle components related to the 2011 Ford E-250.

2016-10-03

POWER TRAIN,ENGINE,FUEL/PROPULSION SYSTEM PROBLEM

Date Of Incident: 2016-09-19
VIN: 1FTNE2EW8BD
Components: POWER TRAIN,ENGINE,FUEL/PROPULSION SYSTEM
Summary: THE PCM AT 34,000 MILES CAUSED TWO FUEL PUMPS TO BURN OUT IN 4 DAYS. A "WRENCH" WARNING SYMBOL APPEARED ON THE DASH AND THE VANS ENGINE DIES WHILE GOING AT HIGH SPEED (WE PULL A PRESSURE WASHING TRAILER HOLDING WITH HAZARDOUS CHEMICALS & WATER). IF IT WAS RAINING OR EVEN HEAVY TRAFFIC THIS COULD CAUSE A DANGEROUS LIFE THREATENING CRASH. ON WET ROADS THESE HEAVY COMMERCIAL VEHICLES CAN EASILY HYDRO-PLAIN WHEN THIS OCCURS PUTTING THE DRIVER & OTHERS IN DANGER WHO MAY BE IN THE PATH. WE ARE NOW WITHOUT OUR SERVICE VAN FOR 2 WEEKS & FORD ESTIMATED IN THE EXCESS OF $2600 IN REPAIRS ON A VEHICLE WITH JUST 34,000 MILES ON THE VAN.WE JUST REPLACED THE TRANSMISSION 3 MONTHS AGO. MY STEP FATHER IS 84 YEARS OLD WHO OWNS THIS VEHICLE AND HE IS A RETIRED NAVY CAPTAIN OF OVER 25 YEARS. HE AND I ARE BOTH CONCERNED THAT THIS VEHICLE IS TOO DANGEROUS TO DRIVE AT HIGH SPEEDS (60-70MPH) WITH THE LOADS WE CARRY IN OUR EVERY DAY SERVICE SCHEDULE. FORD SEEMS TO OFFER NO ASSISTANCE FINANCIALLY AND NO COMFORT IN RESOLVING THE SAFETY ISSUES RESULTING IN THE FAILURE OF THE PCM (POWER TRAIN CONTROL MODULE) WHICH IS OBVIOUSLY VERY DANGEROUS WHEN LARGE COMMERCIAL VEHICLES HAVE THE ENGINE FAILING OR DYING AT HIGH SPEEDS. AFTER READING ABOUT THE THROTTLE BODY PROBLEMS THAT FORD EXPERIENCING WITH OVER 1,600,000 VEHICLES BEING RECALLED, IT SEEMS THAT THE SAME WARNING SYMBOL OF THE TWO SIDED WRENCH APPEARS ON THE DASH AND THE SAME ENGINE FAILING OCCURS AT HIGH SPEEDS. THE SERVICE MECHANIC AT BIG STAR FORD IN MANVEL TX. TOLD ME HE REPLACED THE FIRST FUEL PUMP, DROVE IT ON THE HWY AND HAD TO TOW IT BACK TO THE DEALER BECAUSE IT DIED WHILE TEST DRIVING THE VAN AND BURNED OUT THE NEW FUEL PUMP HE JUST INSTALLED, THEN HE SAID HE PUT A NEW FUEL PUMP IN AGAIN AND USED THAT TO DIAGNOSE THAT THE PCM WAS THE PROBLEM WHILE RUNNING IT ON IDLE FOR AN HOUR. WE ARE NOW CONCERNED THIS NEW PUMP IS DAMAGED.

Add Complaint

2016-06-17

WHEELS PROBLEM

Date Of Incident: 2016-05-10
VIN: 1FTNS2ELXBD
Components: WHEELS
Summary: LAST WEEK I RECEIVED NOTICE FROM MICHELIN NORTH AMERICA THAT MY CLAIM I PRESENTED IN WRITING ON MAY 18 HAD BEEN DENIED. I FILED THE CLAIM BECAUSE I HAD MY WARRANTY TIRE EXPLODED ON MY CARGO VAN RESULTING IN ABOUT $5000. IN DAMAGES. MICHELIN REPRESENTATIVE RITCH TOWNSEND SAYS THAT I AT SOME POINT I HIT SOMETHING SPLITTING THE INNER LINER THAT OVER TIME CAUSED THE TREAD DETACHMENT. THIS DID NOT HAPPEN! I AM THE ONLY PERSON THAT HAS DROVE THIS VAN WITH JUST 33,000. MILES. AREA ATTORNEY'S WITH DEFECTIVE TIRE LITIGATION EXPERIENCE ARE PERSONAL "INJURY ATTORNEY'S". NO INJURY; NO INTEREST! THIS LARGE TIRE MANUFACTURER WILL NOT TAKE RESPONSIBILITY FOR THEIR DEFECTIVE TIRE UNTIL THEY ARE FORCED UNDER JUDGEMENT AND THEN LIKELY ONLY AFTER PEOPLE HAVE LOST THEIR LIVES! ON 05/10/16 I WAS SOUTHBOUND IN CLEARWATER FL ON HWY 19 WHEN I HEARD A SUDDEN EXPLOSION. BEING IN THE FURTHERMOST RIGHT DRIVING LANE I PULLED OFF ONTO THE EMERGENCY LANE AT 12600 HWY 19. I FOUND THAT THE RIGHT REAR TIRE HAD COMPLETELY COME APART AND HAD BADLY BEATEN THE REAR PANEL OF MY VAN. AFTER PUTTING THE SPARE TIRE ON AND GETTING BACK HOME I CONTACTED MICHELIN CONSUMER CARE AND WAS TOLD TO TAKE THE TIRE TO TIRE KINGDOM IN DUNEDIN FOR EVALUATION. THE MANAGER AT THIS STORE IN TURN ALSO TALKED TO THE MICHELIN REPRESENTATIVE EXPLAINING THE TIRE WAS UNDER WARRANTY AND THE TREAD HAS DETACHED. AN OFFER WAS MADE AT THAT TIME TO REPLACE THE TIRE BUT I WOULD HAVE TO LEAVE THE TIRE; MY EVIDENCE OF THE CAUSE OF THE VEHICLE DAMAGE. I DECLINED THE OFFER ELECTING FOR THE MICHELIN CLAIMS PROCESS. AS REQUESTED I SENT THE DEFECTIVE TIRE TO MICHELIN FOR A NON-DESTRUCTIVE TEST OF THE TIRE AND REQUESTED THAT THE TIRE BE RETURNED TO ME AFTER INSPECTION AND I HAVE SINCE RECEIVED THE TIRE BACK IN DUNEDIN. I AM CONVINCED THIS TIRE TELLS A TALE THAT WILL GO UNNOTICED BECAUSE NOBODY LOST THEIR LIFE YET.

Add Complaint

2014-08-11

ENGINE PROBLEM

Date Of Incident: 2014-08-04
VIN: 1FT7W2BT7BE
Components: ENGINE
Summary: TL* THE CONTACT OWNS A 2011 FORD E-250. THE CONTACT STATED THAT THE ENGINE WARNING INDICATOR WAS CONSTANTLY ILLUMINATED. THE DEALER STATED THAT THE UREA PUMP WAS CONTAMINATED AND NEEDED TO BE REPLACED. THE MANUFACTURER WAS NOT NOTIFIED. THE APPROXIMATE FAILURE MILEAGE WAS 36,606. JCC

Add Complaint

2014-05-28

EXTERIOR LIGHTING PROBLEM

Date Of Incident: 2011-06-01
VIN: 1FTNS2EL0BD
Components: EXTERIOR LIGHTING
Summary: A SHORT WHILE AFTER OWNING THE VEHICLE, THE BRAKE LIGHT BULBS BURNT OUT. I'VE HAD TO REPLACE ALL THE BRAKE LIGHT BULBS APPROXIMATELY EVERY 3 MONTHS OR SO. AFTER A FEW BULB REPLACEMENTS I NOTICED THE SOCKETS THAT HOLD THE BULB STARTING TO LOOK BURNT. NOW ALL THE SOCKETS IN THE REAR OF THE VEHICLE ARE TO THE POINT WHERE THEY ARE COMPLETELY "FRIED" AND MELTED NEEDING REPLACED. *TR

Add Complaint

2014-05-15

STRUCTURE PROBLEM

Date Of Incident: 2012-05-24
VIN: 1FT7W2BT7BE
Components: STRUCTURE
Summary: THE INTERIOR GRAB HANDLE IS USED TO CLIMB INTO THE TRUCK. DUE TO A WEAK DESIGN THE HANDLE BREAKS CAUSING THE POTENTIAL FOR A PERSON TO FALL BACKWARDS AND SERIOUSLY INJURING THEMSELVES. *TR

Add Complaint

2011-07-27

STEERING,SUSPENSION PROBLEM

Date Of Incident: 2011-06-11
VIN: 1FTNE2EL7BD
Components: STEERING,SUSPENSION
Summary: TL* THE CONTACT OWNS A 2011 FORD E-250. THE CONTACT WAS DRIVING 72 MPH WHEN THE CONTACT EXPERIENCED A STEERING FAILURE IN WHICH THE STEERING WHEEL BECAME EXTREMELY DIFFICULT TO MANEUVER. THE VEHICLE WAS TAKEN TO THE DEALER FOUR TIMES WHERE THE DEALER ADVISED THAT THE FAILURE WAS A RESULT OF THE BALL JOINT NOT BEING PROPERLY BROKEN IN DURING USE. THE DEALER OFFERED NUMEROUS REMEDIES BUT NONE RESOLVED THE FAILURE. THE VEHICLE WAS NOT REPAIRED. THE FAILURE MILEAGE WAS 347 AND THE CURRENT MILEAGE WAS 2,800. UPDATED 09/15/11 *BF UPDATED 12/19/11

Add Complaint

2011 Ford E-250 recalls

The National Highway Traffic Safety Administration (NHTSA) has issued 16 recalls for different components of the 2011 Ford E-250.

2016-05-24

Manufacturer: New England Wheels
Components: EQUIPMENT ADAPTIVE/MOBILITY
Summary: New England Wheels (New England) is recalling certain model year 2006-2014 Ford E-250, E-350, and 2015 Ford Transit vans equipped with certain model S2005, S2010, S5005, S5010, S5505, and S5510 wheelchair lifts by Ricon. The platform side plate of the affected wheelchair lifts may crack. Additionally, the lifts are equipped with folding link arms that may have pivot holes that are too big, allowing the bearings to move out of position.
Consequence: If the platform side plates crack or the platform mounting fails from out-of-position bearings, the lift platform can separate from the lift and come to rest against the vehicle's lift door. When the vehicle's doors are opened, the platform may fall onto the lift operator, increasing their risk of injury.
Remedy: New England will notify owners, and Ricon dealers will inspect the link arms for damage or for displaced bearings. The platform will be inspected for cracks. Any damaged parts will be replaced, free of charge. The recall began on June 29, 2016. Owners may contact New England customer service at 1-800-886-9247. New England's number for this recall is 16E-020.

2015-11-20

Manufacturer: New England Wheels
Components: EQUIPMENT ADAPTIVE/MOBILITY
Summary: New England Wheels is recalling certain model year 2006-2014 Ford E-250, and E-350 cargo vans modified to be equipped with certain model S2005, S2010, S5005, S5010, S5505, and S5510 wheelchair lifts built by the Ricon Corporation. The affected lifts are equipped with folding link arms that may have pivot holes that are too big, allowing the bearings to move out of position.
Consequence: If the bearings move out of position, the stowed platform may have excessive movement resulting in failure of the platform mounting. This failure could cause the wheel chair lift platform to fall out of the vehicle when the doors are opened, increasing the risk of injury for the lift operator.
Remedy: New England Wheels will notify owners, and Ricon dealers will inspect the link arms for damage or for displaced bearings. The platform will be inspected for cracks. Any damaged parts will be replaced, free of charge. The recall began on January 5, 2016. Owners may contact New England Wheels customer service at 1-800-866-9247, or Ricon Customer Service at 1-800-322-2884. New England Wheels' number for this recall is 15E-068. Note: These vans and wheelchair lifts were subject to a similar recall in 2014. All vehicles that received that recall remedy are still affected by this recall as well.

2015-11-17

Manufacturer: Mobility Specialists, Inc.
Components: EQUIPMENT ADAPTIVE/MOBILITY
Summary: Mobility Specialists, Inc. (Mobility Specialists) is recalling certain model year 2006-2014 Ford E-250, and E-350 vehicles modified to be equipped with certain model S2005, S2010, S5005, S5010, S5505, and S5510 wheelchair lifts manufactured by Ricon Corporation. The platform side plate of the affected wheelchair lifts may crack. Additionally, the affected lifts are equipped with folding link arms that may have pivot holes that are too big, allowing the bearings to move out of position.
Consequence: If the platform side plates crack, the lift platform can separate from the lift and come to rest against the vehicle's lift door. When the doors are opened, the platform may fall out, increasing the risk of injury to the lift operator. Additionally, if the bearings move out of position, the stowed platform may have excessive movement resulting in failure of the platform mounting. This failure could cause the wheel chair lift platform to fall out of the vehicle when the doors are opened, increasing the risk of injury for the lift operator.
Remedy: Mobility Specialists will notify owners to take their vehicles to a Ricon dealer or service center who will install supplemental platform support bumpers. Any platform that has already started cracking will be replaced, free of charge. The recall began on November 13, 2015. Owners may contact Mobility Specialists customer service at 1-877-777-5438, or Ricon customer service at 1-800-322-2884.

2015-11-04

Manufacturer: Mobility Works (WMK Inc.)
Components: EQUIPMENT ADAPTIVE/MOBILITY
Summary: MobilityWorks (WMK Inc.) is recalling certain model year 2006-2014 Ford E-150, E-250, and E-350 vans modified by MobilityWorks to be equipped with certain model S2005, S2010, S5005, S5010, S5505, and S5510 wheelchair lifts manufactured by Ricon Corporation. The affected lifts are equipped with folding link arms that may have pivot holes that are too big, allowing the bearings to move out of position.
Consequence: If the bearings move out of position, the stowed platform may have excessive movement resulting in failure of the platform mounting. This failure could cause the wheel chair lift platform to fall out of the vehicle when the doors are opened, increasing the risk of injury for the lift operator.
Remedy: MobilityWorks will notify owners, and Ricon dealers will inspect the link arms for damage or for displaced bearings. The platform will be inspected for cracks. Any damaged parts will be replaced, free of charge. The recall began on December 15, 2015. Owners may contact MobilityWorks customer service at 1-800-769-8267, or Ricon Customer Service at 1-800-322-2884. Note: These vehicles and wheelchair lifts were subject to a similar recall in 2014. All vehicles that received that recall remedy are still affected by this recall as well.

2014-11-05

Manufacturer: Cummings Mobility Conversion & Supply
Components: EQUIPMENT ADAPTIVE/MOBILITY
Summary: Cummings Mobility Conversion & Supply (Cummings) is recalling certain model year 2006-2014 Ford E-150, E-250, E-350, Chevrolet Express, 2006-2008 Dodge Sprinter, and 2009-2014 Mercedes-Benz Sprinter, and 2013 Ford Transit Connect vehicles manufactured January 1, 2006, to October 8, 2014, equipped with certain model S2005, S2010, S5005, S5010, S5505, and S5510 wheelchair lifts manufactured by Ricon Corporation after January 1, 2006. The platform side plate of the affected wheelchair lifts may crack.
Consequence: If the platform side plates crack, the lift platform can separate from the lift and come to rest against the vehicle's lift door. When the doors are opened, the platform may fall out, increasing the risk of injury to the lift operator.
Remedy: Cummings will notify owners to take buses to a Ricon dealer or service center who will install supplemental platform support bumpers. Any platform that has already started cracking will be replaced, free of charge. The recall began January 13, 2015. Owners may contact Cumming's customer service at 1-800-639-5438 or Ricon customer service at 1-800-322-2884. Cumming's number for this recall is 14E-041.

2014-10-03

Manufacturer: New England Wheels
Components: EQUIPMENT ADAPTIVE/MOBILITY
Summary: New England Wheels (New England) is recalling certain model year 2006-2014 E-250, and E-350 vehicles modified by New England to be equipped with certain model S2005, S2010, S5005, S5010, S5505, and S5510 wheelchair lifts manufactured by Ricon Corporation. The platform side plate of the affected wheelchair lifts may crack.
Consequence: If the platform side plates crack, the lift platform can separate from the lift and come to rest against the vehicle's lift door. When the doors are opened, the platform may fall out, increasing the risk of injury to the lift operator.
Remedy: New England will notify owners to take vehicles to a Ricon dealer or service center who will install supplemental platform support bumpers. Any platform that has already started cracking will be replaced, free of charge. The recall began on November 17, 2014. Owners may contact New England customer service at 1-800-886-9247 or Ricon customer service at 1-800-322-2884. New England's number for this recall is 14E-041.

2014-09-23

Manufacturer: National Van Builiders, Inc.
Components: EQUIPMENT ADAPTIVE/MOBILITY
Summary: National Van Builders, Inc. (National Van) is recalling certain 2007-2014 Ford E-150 and E-250 vehicles manufactured February 26, 2007, to August 19, 2014, and equipped with certain model S2005, S2010, S5005, S5010, S5505, and S5510 wheelchair lifts manufactured by Ricon Corporation. The platform side plate of the affected wheelchair lifts may crack.
Consequence: If the platform side plates crack, the lift platform can separate from the lift and come to rest against the vehicle's lift door. When the doors are opened, the platform may fall out, increasing the risk of injury to the lift operator.
Remedy: National Van will notify owners to take buses to a Ricon dealer or service center who will install supplemental platform support bumpers. Any platform that has already started cracking will be replaced, free of charge. The recall began on October 3, 2014. Owners may contact National Van customer service at 1-800-527-7477. National Van's number for this recall is Ricon2014.

2014-07-10

Manufacturer: Roush Performance Products, Inc.
Components: FUEL SYSTEM, OTHER:DELIVERY:HOSES, LINES/PIPING, AND FITTINGS
Summary: Roush Performance Products, Inc. (Roush) is recalling certain model year 2010-2012 Ford E-150 Wagons and Cargo Vans, E-250 Cargo Vans and Extended Cargo Vans, E-350 Wagons, Extended Wagons, Cargo Vans, and Extended Vans, and E-450 Cutaway models. These models were modified by Roush to be equipped with certain propane fuel system conversion kits manufactured January 2011 to August 2012 with an aluminum fuel line fitting. Due to a reaction between the different metals, the affected kits may develop a propane leak where the aluminum fuel line fitting contacts the brass supply valve housing.
Consequence: A propane leak in the presence of an ignition source increases the risk of a fire.
Remedy: Roush will notify owners and will replace the aluminum fuel line fittings with new stainless steel fittings, free of charge. The recall began on September 1, 2014. Owners may contact Roush customer service at 1-800-597-6874.

2014-03-04

Manufacturer: Landi Renzo USA
Components: FUEL SYSTEM, OTHER:STORAGE
Summary: Landi Renzo USA is recalling certain model year 2011-2014 Ford E-150, E-250, and E-350 vehicles modified January 2, 2011, through February 24, 2014 to operate on compressed natural gas (CNG). In the affected vehicles, the left and right rear brackets that support the rear CNG cylinder may fail, allowing the cylinder to dislodge from the vehicle.
Consequence: If the cylinder dislodges, a CNG leak may result, increasing the risk of a fire.
Remedy: Landi Renzo USA will notify owners, and dealers will inspect and replace the side arm brackets, as necessary, free of charge. The recall began on March 27, 2014. Owners may contact Landi Renzo USA at 1-855-526-3400.

2013-06-21

Manufacturer: Mobility Works (WMK Inc.)
Components: EQUIPMENT
Summary: Mobility Works is recalling certain model year 2006-2012 Ford E-150, E-250 and E-350 vehicles manufactured August 2006 through August 2012. The vehicles are equipped with certain Ricon S series and K Series wheelchair lifts with an optional armored pendant cable. The armored cable may be positioned such that it does not clear the wheelchair lift.
Consequence: If the cable does not clear the wheel chair lift it may contact the power lug and, if it does not have a nonconductive cover, or it has an improperly installed non-conductive cover, a short circuit may occur that could result in a fire.
Remedy: Mobility Works will notify owners and Ricon will provide a supplemental cover kit and instructions, free of charge. This recall campaign is expected to begin July 15, 2013. Owners may contact Mobility Works at 1-877-275-4912 and Ricon at 1-818-267-3000.

2011-08-31

Manufacturer: ROUSH PERFORMANCE PRODUCTS, INC.
Components: FUEL SYSTEM, OTHER:FUEL INJECTION SYSTEM
Summary: ROUSH IS RECALLING CERTAIN MODEL YEAR 2009-2011 FORD E-150, E-250, AND E-350 5.4L ENGIN VANS/WAGONS/CUTAWAYS, AND MODEL YEAR 2010-2011 FORD E-450 6.8L ENGINE CUTAWAY VEHICLES ALTERED BY ROUCH TO OPERATE USING THE ROUSH BRANDED CLEANTECH PROPANE AUTOGAS FUEL SYSTEM. THE FUEL RAILS INCLUDED IN THE KITS CONTAIN IMPROPERLY SEATED INJECTOR RETENTION CLIPS. THIS COULD RESULT IN LEAKAGE OF PROPANE AUTOGAS.
Consequence: A PROPANE LEAK IN THE PRESENCE OF AN IGNITION SOURCE CAN RESULT IN A FIRE.
Remedy: ROUSH WILL NOTIFY OWNERS OF THE VEHICLES OF WHICH THE KITS WERE INSTALLED IN ORDER TO ARRANGE FOR FREE REPLACEMENT OF THE INJECTOR RETENTION CLIPS. THE SAFETY RECALL BEGAN ON SEPTEMBER 26, 2011. OWNERS MAY CONTACT ROUSH AT 1-734-466-6255.

2011-08-31

Manufacturer: ROUSH INDUSTRIES, INC.
Components: FUEL SYSTEM, OTHER:FUEL INJECTION SYSTEM
Summary: ROUSH IS RECALLING CERTAIN AFTERMARKET ROUSH CLEAN TECH LIQUID PROPANE AUTOGAS FUEL SYSTEM KITS USED FOR INSTALLATION ON THE FOLLOWING VEHICLES: MODEL YEAR 2007 AND 2008 FORD E-350 (DUEL REAR WHEEL), MY 2009-2011 FORD E- 150, E-250, AND E-350, AND MY 2009-2011 FORD E-450 CUTAWAYS. THE FUEL RAILS INCLUDED IN THE KITS CONTAIN IMPROPERLY SEATED INJECTOR RETENTION CLIPS. THIS COULD RESULT IN LEAKAGE OF PROPANE AUTOGAS. THE PART NUMBERS OF THE AFFECTED KITS ARE: P07C2-176KIT-AB, P10C2-RCOMMKIT-AB, P10C2-R150KIT-AA, P10C2-R150KIT-AC, P10C2-R350KIT-AC, P11C2-R150KIT-AA, P11C2-R150KIT-AB, P11C2-R350KIT-AA, P11C2-R350KIT-AB, P10-SO-RKIT-BA, PBC2-RKIT158-AB, PBC2-RKIT176-AB, AND PBC2-RKITMB-AC.
Consequence: A GAS LEAK IN THE PRESENCE OF AN IGNITION SOURCE CAN RESULT IN A FIRE.
Remedy: ROUSH WILL NOTIFY OWNERS OF THE VEHICLES OF WHICH THE KITS WERE INSTALLED ON IN ORDER TO ARRANGE FOR FREE REPLACEMENT OF THE INJECTOR RETENTION CLIPS. THE SAFETY RECALL BEGAN ON SEPTEMBER 29, 2011. OWNERS MAY CONTACT ROUSH AT 1-800-59-ROUCH (1-800-597-6874.

2011-08-26

Manufacturer: FORD MOTOR COMPANY
Components: VISIBILITY:WINDSHIELD
Summary: Ford Motor Company (Ford) is recalling certain model year 2011 Ford E-150, E-250, E-350, and E-450 vehicles built from May 12, 2011, through May 26, 2011. Due to improper manufacturing conditions, some of the windshields may form bubbles after an extended time in hot temperatures. As such, these vehicles fail to conform to the requirements of Federal Motor Vehicle Safety Standard No. 205, "Glazing Materials."
Consequence: The presence of bubbles may hinder driver's visibility thereby increasing the risk of a crash.
Remedy: Ford will notify owners, and dealers will inspect and replace the windshield if bubbles are present, free of charge. The recall began in January 2014. Owners may contact the Ford customer relationship center at 1-866-436-7332. Ford's recall campaign number is 11C20.

2011-05-31

Manufacturer: ROUSH PERFORMANCE PRODUCTS, INC.
Components: FUEL SYSTEM, OTHER:DELIVERY:HOSES, LINES/PIPING, AND FITTINGS
Summary: ROUSH PERFORMANCE PRODUCTS IS RECALLING CERTAIN 2011 FORD E-SERIES VANS EQUIPPED WITH 5.4 OR 6.8 LITER ENGINES THAT HAVE BEEN ALTERED BY ROUSH TO OPERATE USING THE ROUSH LIQUID PROPANE AUTOGAS FUEL SYSTEM. A VALVE IN THE SYSTEM MAY HAVE BEEN MISMACHINED ALLOWING A PROPANE LEAK.
Consequence: A PROPANE LEAK IN THE PRESENCE OF AN IGNITION SOURCE MAY RESULT IN A VEHICLE FIRE.
Remedy: ROUSH WILL REPLACE THE DEFECTIVE VALVE WITH A CORRECTLY MACHINED ONE. ALL THE AFFECTED VEHICLES HAVE BEEN REPAIRED, THEREFORE, AN OWNER NOTIFICATION LETTER WILL NOT BE ISSUED FOR THIS CAMPAIGN. OWNERS MAY CONTACT ROUSH AT 1-734-466-6255.

2011-05-31

Manufacturer: ROUSH INDUSTRIES, INC.
Components: FUEL SYSTEM, OTHER:DELIVERY:HOSES, LINES/PIPING, AND FITTINGS
Summary: ROUSH IS RECALLING CERTAIN AFTERMARKET ROUSH CLEAN TECH LIQUID PROPANE AUTOGAS FUEL SYSTEM KITS PRODUCED BETWEEN DECEMBER 17, 2010, AND MAY 6, 2011, USED FOR INSTALLATION ON FLEET VEHICLES MODEL YEAR 2009 THROUGH 2011 FORD E-SERIES VANS/WAGONS/SHUTTLES/CUTAWAY (150, 250 AND 350) WITH 5.4L ENGINES ("E-SERIES"), AND MY 2011 FORD E-450 CUTAWAYS. THE VALVES INSTALLED IN THE SERVICE PORT OF THE FUEL RAILS OF THE KIT WERE UNDER MINIMUM SPECIFICATION FOR THE DIAMETER. THIS LED TO INSUFFICIENT COMPRESSION OF THE O-RING, ALLOWING LEAKAGE OF PROPANE AUTOGAS. THE PART NUMBERS OF THE AFFECTED KITS ARE: P10C2-R150KIT-AA, P10C2-R150KIT-AC, P10C2-R350KIT-AC, P11C2-R150KIT-AA, P11C2-R150KIT-AB, P11C2-R350KIT-AA, P11C2-R350KIT-AB, P-10-SO-RKIT-BA, PBC2-RKIT158-AB, PBC2-RKIT176-AB, AND PBC2-RKITMB-AC.
Consequence: A GAS LEAK IN THE PRESENCE OF AN IGNITION SOURCE CAN RESULT IN A FIRE.
Remedy: AS OF MAY 27, 2011, ROUSH HAD NOTIFIED ALL OWNERS OF RECORD BY TELEPHONE AND SHIPPED TO THEM REPLACEMENT VALVES FREE OF CHARGE. OWNERS MAY CONTACT ROUSH AT 1-734-466-6255.

2011-04-20

Manufacturer: FORD MOTOR COMPANY
Components: SEATS:FRONT ASSEMBLY:POWER ADJUST
Summary: FORD IS RECALLING CERTAIN MODEL YEAR 2011 E-150, E-250, E-350 AND E-450 TRUCKS FOR FAILING TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 207, "SEATING SYSTEMS." IT MAY BE POSSIBLE THAT UNDER UNUSUALLY HIGH LOADS, SUCH AS DURING A CRASH, THE DRIVER POWER SEAT TRACK WORM GEAR MAY FRACTURE.
Consequence: IN THE EVENT OF A CRASH OR OTHER CIRCUMSTANCES OF SEVERE LOADING, THE WORM GEAR COULD FRACTURE AND ALLOW THE SEAT TO SHIFT UNRESTRAINED FORWARD OR BACKWARD INCREASING THE RISK AND/OR SEVERITY OF INJURIES TO THE DRIVER.
Remedy: DEALERS WILL INSPECT THE DRIVER'S SEAT TRACK ASSEMBLY, AND IF NECESSARY, REPLACE IT FREE OF CHARGE. THE SAFETY RECALL BEGAN ON MAY 4, 2011. OWNERS MAY CONTACT FORD MOTOR COMPANY CUSTOMER RELATIONSHIP CENTER AT 1-866-436-7332.

Additional sources

More sources of information about 2011 Ford E-250 problems:

2011 Ford E-250 Problems and Complaints - 6 Issues

https://repairpal.com/2011-ford-e-250/problems

Problem with your 2011 Ford E-250? Our list of 6 known complaints reported by owners can help you fix your 2011 Ford E-250.

Ford E-Series Questions - Intermittant electrical problem - CarGurus

https://www.cargurus.com/Cars/Discussion-t92418_ds530682

Oct 10, 2012 ... Intermittant electrical problem - We recently purchased a used 2007 E250 cargo van with 80+ miles from a dealer. After driving it for a week ...

Common Problems with 2004 Ford E250 Van - Q&A

https://www.justanswer.com/ford/bxbu2-common-problem-2004-ford-e250-van.html

Jan 8, 2019 ... I have a common problem on my 2004 Ford e250 van, where I can[t fill the tank without the pump clicking off constantly.

2012 5.4L E-350 reliability problems - Ford Truck Enthusiasts Forums

https://www.ford-trucks.com/forums/1668021-2012-5-4l-e-350-reliability-problems.html

Jul 15, 2021 ... Weak points I've experienced: - rear heater core leak. Look for wet carpet, disconnected or purposely plugged coolant lines. You might not need ...