1967 Ford Mustang problems

General information about Ford-Mustang
Overview of popular issues
Analysis of common problems
Сomplaints list
Recalls list

The Ford Mustang is a series of American automobiles manufactured by Ford. In continuous production since 1964, the Mustang is currently the longest-produced Ford car nameplate. Currently in its seventh generation, it is the fifth-best selling Ford car nameplate. The namesake of the "pony car" automobile segment, the Mustang was developed as a highly styled line of sporty coupes and convertibles derived from existing model lines, initially distinguished by "long hood, short deck" proportions.

Originally predicted to sell 100,000 vehicles yearly, the 1965 Mustang became the most successful vehicle launch since the 1927 Model A. Introduced on April 17, 1964 (16 days after the Plymouth Barracuda), over 400,000 units were sold in its first year; the one-millionth Mustang was sold within two years of its launch. In August 2018, Ford produced the 10-millionth Mustang; matching the first 1965 Mustang, the vehicle was a 2019 Wimbledon White convertible with a V8 engine.

The success of the Mustang launch led to multiple competitors from other American manufacturers, including the Chevrolet Camaro and Pontiac Firebird (1967), AMC Javelin (1968), and Dodge Challenger (1970). It also competed with the Plymouth Barracuda, which was launched around the same time. The Mustang also had an effect on designs of coupes worldwide, leading to the marketing of the Toyota Celica and Ford Capri in the United States (the latter, by Lincoln-Mercury). The Mercury Cougar was launched in 1967 as a unique-bodied higher-trim alternative to the Mustang; during the 1970s, it included more features and was marketed as a personal luxury car.

From 1965 until 2004, the Mustang shared chassis commonality with other Ford model lines, staying rear-wheel-drive throughout its production. From 1965 to 1973, the Mustang was derived from the 1960 Ford Falcon compact. From 1974 until 1978, the Mustang (denoted Mustang II) was a longer-wheelbase version of the Ford Pinto. From 1979 until 2004, the Mustang shared its Fox platform chassis with 14 other Ford vehicles (becoming the final one to use the Fox architecture). Since 2005, Ford has produced two generations of the Mustang, each using a distinct platform unique to the model line.

Through its production, multiple nameplates have been associated with the Ford Mustang series, including GT, Mach 1, Boss 302/429, Cobra (separate from Shelby Cobra), and Bullitt, along with "5.0" fender badging (denoting 4.9 L OHV or 5.0 L DOHC V8 engines).

Social links

Common 1967 Ford Mustang problems

The 1967 Ford Mustang is a classic car that has been praised for its reliability and performance. However, there are some common problems that owners of this car have reported.

One of the most common issues with the 1967 Ford Mustang is transmission problems. This can manifest as a grinding motion during gear shifting, particularly at low revs or speeds. This problem can be caused by a variety of issues, including worn-out gears, low transmission fluid levels, or a faulty clutch. The transmission problems can be fixed by replacing the worn-out parts, adjusting the clutch, or topping up the transmission fluid.

Another common problem with the 1967 Ford Mustang is engine problems. This can include issues with the exhaust sound and overall performance of the engine. One owner reported problems during a sound check, which could indicate issues with the exhaust system or engine performance. Engine problems can be caused by a variety of issues, including worn-out parts, dirty fuel injectors, or a faulty ignition system. These problems can be fixed by replacing worn-out parts, cleaning the fuel injectors, or checking the ignition system for faults.

The 1967 Ford Mustang is also prone to recalls related to failing wheels. Two recalls have been logged against the car, both of which are related to wheel issues. The first recall is for wheel spindles that may fail, which could lead to a nasty incident when on the road. The second recall is for steering wheel spokes that may fail. These recalls are important to check for when considering purchasing a 1967 Ford Mustang, as they could impact the safety of the car.

In addition to these specific problems, many of the issues that crop up for owners of 1967 Mustangs can be attributed to the age of these cars. For example, numerous owners have reported issues with the car's electrical and mechanical systems, which can be caused by wear and tear over time. These problems can be fixed by replacing worn-out parts or performing regular maintenance on the car.

In summary, the 1967 Ford Mustang is a classic car that has been praised for its reliability and performance. However, there are some common problems that owners of this car have reported, including transmission problems, engine problems, and recalls related to failing wheels. These problems can be fixed by performing regular maintenance on the car and replacing worn-out parts.

Is the 1967 Mustang reliable?

Across three separate reviews, the 1967 Mustang achieved a score of 8.3 out of 10 for reliability. According to one owner, 'nothing has gone wrong with my car – the only problem has been with the previous work done by inexperienced people'.

What was the worst year for Mustang?

Top 10 Worst Mustangs Ever Made

2022 Mustang. The last Mustang on the list might also be a surprise, and that's the 2022 Mustang.
1969-1973 Mustang Grande. ...
2010 Mustang. ...
2015 50th Anniversary Limited Edition Mustang. ...
1980-1981 V8 Mustang. ...
2015-2017 Mustang V6. ...
Mustang SVO. ...
1979 3.3 Liter V6 Mustang. ...

What to look for when buying a 1967 Mustang?

10 Rules for Buying Vintage Mustangs

Identify VIN Number and Door Date Plate. ...
Examine the Exterior. ...
Try Out the Electrical System. ...
Test Operations. ...
Inspect Engine and Transmission. ...
Test Brakes and Suspension. ...
Make Sure It's Structurally Sound. ...
Get a Feel for the Inside.

What is the common problem with Mustangs?

Valve Cover Gasket Leaks. Watch for oil leaks as your Ford Mustang grows older. Specifically, you'll want to check engine valve cover gaskets for cracks. Some vehicle generations like the fifth-generation SN95 and New Edge Mustangs are prone to their valve cover gaskets leaking oil.

What is the common problem with Mustangs?

What was the worst year for Mustang?

Top 10 Worst Mustangs Ever Made

2022 Mustang. The last Mustang on the list might also be a surprise, and that's the 2022 Mustang.
1969-1973 Mustang Grande. ...
2010 Mustang. ...
2015 50th Anniversary Limited Edition Mustang. ...
1980-1981 V8 Mustang. ...
2015-2017 Mustang V6. ...
Mustang SVO. ...
1979 3.3 Liter V6 Mustang. ...

What are disadvantages of Ford Mustang?

Things We Don't Like

Steering Feel. The Mustang offers three settings for steering effort, but it's hard to notice much difference between them. ...
Carbon-Fiber Knockoff. ...
Snug Seats.

What is special about a 1967 Mustang?

1967 was also the first year for the GT500, which was supplied with a Ford Cobra 428ci V8 engine, capable of galloping to an impressive 0-60mph of 5.7 seconds. On these Shelby Mustang 1967 models, fibreglass was used for the bonnet back panel to reduce weight and other areas to keep that weight down and performance up.

1967 Ford Mustang car problems categorized by type of issue

After analyzing all complaints sent to the NHTSA and researching popular Ford Mustang problems, we found that the most common problems with these 2023 model year vehicles are:

Service brakes problems
Hydraulic problems
Fuel system problems
Gasoline problems

The graph below shows statistics for all 1967 Ford Mustang vehicle components and the number of complaints received.

1967 Ford Mustang complaints

The NHTSA has received 3 complaints about various vehicle components related to the 1967 Ford Mustang.

2008-11-22

FUEL SYSTEM, GASOLINE PROBLEM

Date Of Incident: 1973-05-10
Components: FUEL SYSTEM, GASOLINE
Summary: FORD, 1967 MUSTANG, SIX CYL AUTO TRANS. WHILE I WAS STOPPED FOR A LIGHT, THE CARBURETOR RETURN SPRING LET GO. LUCKY FOR ME, I HAD MY FOOT ON THE BRAKE AND OFF THE GAS PEDAL AS I WAS STILL IN DRIVE. I HEARD THE SPRING BOUNCE OFF THE FAN AND THE ENGINE SPEED UP. I SHUT OFF THE ENGINE, TOOK THE SHIFT OUT OF DRIVE AND COASTED TO THE CURB.. I COULD NOT FIND ANY PART OF THE SPRING OR ANCHOR POINT. I TOOK A SPRING OUT FROM UNDER THE PASSENGER SEAT AND USED THAT ARRANGEMENT FOR A NUMBER OF YEARS. I STILL HAVE THE CAR IN THE GARAGE BUT HAVE NOT USED IT FOR ABOUT 30 YEARS. AT THE TIME THERE WERE A NUMBER OF INCIDENTS WHERE THESE MUSTANGS SPED UP OUT OF CONTROL, WITH SERIOUS CONSEQUENCES. FORD WOULD NOT OWN UP TO THE PROBLEM. I HAD GONE TO FORD ASKING FOR REPLACEMENT PARTS, BUT NO RESPONSE. I HAD WRITTEN TO NTSB A NUMBER OF YEARS AGO, BUT NO RESPONSE THERE EITHER. STATUE OF LIMITATIONS HAS MOST LIKELY RUN OUT FOR REPARATIONS TO THE ACCIDENT VICTIMS. OF COURSE THE PROBLEM WAS EVENTUALLY RECOGNIZED WITHOUT HONOR TO THE VICTIMS AND THE TENSION SPRINGS REPLACED BY A SERIES OF COMPRESSION SPRINGS ON LATER MODELS THEREAFTER. NEVER HAVE RECEIVED A RECALL NOTICE BY FORD. *TR

Add Complaint

1999-01-08

SERVICE BRAKES, HYDRAULIC PROBLEM

Date Of Incident: 2024-11-24
Components: SERVICE BRAKES, HYDRAULIC
Summary: BRAKE DRUM INSTALLED IMPROPERLY CAUSING DAMAGE TO OTHER BRAKE COMPONENTS.

Add Complaint

1999-01-08

SERVICE BRAKES, HYDRAULIC PROBLEM

Date Of Incident: 2024-11-24
Components: SERVICE BRAKES, HYDRAULIC
Summary: BROKEN BLEED VALVE STEM RESULTING IN LEAKAGE.

Add Complaint

1967 Ford Mustang recalls

The National Highway Traffic Safety Administration (NHTSA) has issued 5 recalls for different components of the 1967 Ford Mustang.

2019-02-09

Manufacturer: Drake Automotive Group LLC
Components: STEERING:LINKAGES:KNUCKLE:SPINDLE:ARM
Summary: Drake Automotive Group, LLC (Drake) is recalling certain Scott Drake left and right wheel spindles, part numbers C5ZZ-3106-L, C5ZZ-3105-R, C70Z-3106-L, C70Z-3105-R sold for use on 1965-1966 Ford Mustang V8s and 1967-1969 Ford Mustangs (all vehicles with drums). The spindle may fail resulting in the wheel and tire detaching from the vehicle's steering system.
Consequence: Spindle failure can cause a loss of steering control, increasing the risk of a crash.
Remedy: Drake Automotive Group, LLC will notify owners and will replace all of the recalled units, free of charge. The recall began March 17, 2019. Owners may contact Drake automotive at 1-800-999-0289.

1967-11-15

Manufacturer: FORD MOTOR COMPANY
Components: STEERING: STEERING WHEEL/HANDLE BAR

1967-10-03

Manufacturer: FORD MOTOR COMPANY
Components: STEERING: STEERING WHEEL/HANDLE BAR

1966-10-06

Manufacturer: FORD MOTOR COMPANY
Components: STEERING:GEAR BOX (OTHER THAN RACK AND PINION)

1966-10-06

Manufacturer: FORD MOTOR COMPANY
Components: STRUCTURE:BODY

Additional sources

More sources of information about 1967 Ford Mustang problems:

1967 mustang electrical problems | Ford Mustang Forum

https://www.allfordmustangs.com/threads/1967-mustang-electrical-problems.857801/

May 20, 2015 ... In my 1967 mustang I have a wiring problem where if i jump stat the car it will run fine and drive fine until i shut it off, once i shut it ...

1967 Mustang electrical drain | Ford Mustang Forum

https://www.allfordmustangs.com/threads/1967-mustang-electrical-drain.339965/

Apr 20, 2012 ... Brake light, backup lights are easy to miss in the daylight. Glovebox light is a common problem and easy to miss. That will get you started. 66 ...

5 Common Mustang Problems And How To Fix Them - Muscle Car

https://musclecar.uk/how-to/5-common-mustang-problems-and-how-to-fix-them/

Jan 25, 2021 ... Many Mustang car owners are used to dead or stalled engines. Some common issues include failed transmission performance during gear shifting, ...