1982 Ford Bronco ii problems

Common 1982 Ford Bronco ii problems

The 1982 Ford Bronco II is known for several common problems that have been reported by its owners. Here are some of the most frequently mentioned issues:

• Brake Light Indication: The brake light on the Bronco II's dashboard may come on intermittently, indicating a potential issue with the brake system. This could be due to a faulty brake sensor or low brake fluid levels. It is recommended to check the brake lines for leaks and ensure that the brake fluid level is adequate. If the problem persists, it may be necessary to replace the brake sensor or have the brake system inspected by a professional.

• Tinted Windows: Some Bronco II owners have expressed concerns about the "tinted" windows, which were coated with a plastic film by previous owners. This film can make it difficult to see at night, as it reduces visibility. Removing this film can be challenging, and it is recommended to seek professional assistance to avoid damaging the windows. Some owners have reported success in using a heat gun or hair dryer to soften the adhesive and carefully scraping off the film with a razor blade.

• 4X4 Engagement: As the Bronco II is a 4x4 vehicle, some owners may be unfamiliar with how to engage the 4-wheel-drive system. The process typically involves moving a lever or switch to engage the transfer case, which then distributes power to all four wheels. It is recommended to consult the vehicle's manual or seek professional assistance to ensure proper engagement of the 4x4 system.

• Stability and Rollover Issues: The 1982 Ford Bronco II has been associated with stability and rollover issues, which were a concern during the design phase and were later highlighted by safety organizations such as Consumers Union and the National Highway Traffic Safety Administration. These issues are related to the vehicle's high center of gravity and narrow track width, which can make it more prone to tipping over during emergency maneuvers. It is recommended to exercise caution when driving the Bronco II, especially at high speeds or in situations that require sudden changes in direction.

In summary, the 1982 Ford Bronco II has several common problems that owners may encounter, including engine performance issues, intermittent brake light indications, tinted windows, 4x4 engagement, and stability concerns. Regular maintenance and careful driving can help mitigate some of these issues, but it is essential to be aware of these potential problems when owning and operating a Bronco II.

What is the best year for the Bronco 2?

The final year of the Bronco II is without a doubt the best one to purchase used. In late 1989, four-wheel-drive Bronco IIs saw an improved front axle. They also received improved cylinder heads to help with an issue some earlier models had with cracking if they became overheated.

Are older Ford Broncos reliable?

If maintained well over the years, vintage Ford Broncos can be remarkably reliable. Their simple mechanical design, robust construction, and solid axles were built to last. That's the good news. However, as is typical of vehicles from that era, they do come with inherent quirks.

What is the Bronco II rollover lawsuit?

Ford stopped manufacturing the Bronco II in 1990 but has always contended that rollovers are overwhelmingly caused by bad driving or unsafe modifications to the vehicle. Nonetheless, Ford has paid more than $113 million to settle hundreds of injury and wrongful-death claims involving Bronco II rollovers.

What is the most desirable year of the Ford Bronco?

1977

Out of all the years of the first-generation Bronco, 1977 is widely considered to be the best year although anything from 74 is not only sought after, but more widely available.

Are there problems with Ford Bronco?

The engine is the heart of any vehicle, and the Ford Bronco is no exception. One common engine issue owners report is overheating, possibly due to a malfunctioning radiator, a faulty thermostat, or a coolant leak.

Is an old Ford Bronco reliable?

If maintained well over the years, vintage Ford Broncos can be remarkably reliable. Their simple mechanical design, robust construction, and solid axles were built to last. That's the good news. However, as is typical of vehicles from that era, they do come with inherent quirks.

What is the best year for the Bronco 2?

The final year of the Bronco II is without a doubt the best one to purchase used. In late 1989, four-wheel-drive Bronco IIs saw an improved front axle. They also received improved cylinder heads to help with an issue some earlier models had with cracking if they became overheated.

What engine came with a 1982 Ford Bronco?

The base equipment for 1982 would have been Ford's excellent 300 cu-in inline-six engine fronting a four-speed manual transmission, but this particular Bronco benefits from a 351W V-8, sucking go-juice through a two-barrel Motorcraft carb to produce a 136 hp and 262 lb-ft power rating.

1982 Ford Bronco ii car problems categorized by type of issue

After analyzing all complaints sent to the NHTSA and researching popular Ford Bronco ii problems, we found that the most common problems with these 2023 model year vehicles are:

• Tires problems

The graph below shows statistics for all 1982 Ford Bronco ii vehicle components and the number of complaints received.